Intek 400 Bedienungsanleitung PDF herunterladen (Seite 15)

- 13 -

Figure 5. Typical Time Response Characteristics

CUSTOM INFORMA-TION.

3.4 OUTPUT CURVE

If the instrument is ordered with a calibrated

output signal, the output curve for the unit can

be found after SECTION 6. For an

uncalibrated unit with a 4-20mA option, a

typical curve is shown in Figure 6. Check

SECTION 6 for the corresponding full scale

value for this instrument. Flow can also be

found by the formula:

FLOW (%FS) = exp [ exp (0.5547* X + 0.26935 ) ] / 0.1758

where X is the flow output signal in mA.

Figure 6. Typical Output Curve (for units with 4-20mA output option)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Intek 400 Bedienungsanleitung Seite 15