Intek 100 Bedienungsanleitung PDF herunterladen (Seite 12)

- 10 -

MODEL100 REV D.wpd

E. Restore power.

F. Connect a DC voltmeter across the TEMP (

%) and the GND (!) test point jumpers.

Select R3* for proper TEMP value. Select R2* (coarse) and adjust R1* (fine) for

)T

value.

G. Compare the measured flow rate and the indicated flow rate to original calibration data

of Table II. Recheck TEMP and

)T.

*resistors of dummy transducer

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare